IMD/IML high pressure shaper

余永枝 所在地： 深圳市 　行业：机械及行业设备 职位：外销员

1. The high tension system, fills the low pressure to fill the high pressure again first, the high pressure, the low pressure pressure, guarantees presses the time with to fill presses the speed to be possible to adjust independently. 2. Mold temperature high speed normal temperature ~200 degrees. (PID control mold temperature).
3. The IR remote infrared ray temperature control normal temperature ~400 degrees, the unilateral 12 independent temperature PID control, unifies the adjustment by the touchscreen.
4. The high tension system top pressure may reach 150bar (Kg/CM2) steel cylinder.
5. A mold may make 1-12 holes, regards the aircraft type to decide, mold available area for 600mm×600mm.
6. The formation time is 30-70 seconds (including into mold, matched molds, pre-warm high-pressured formation, die sinking, leaves movement of the mold).
7. The outer covering picks Qian Zhaoshi the anodic treatment.
8. Uses the colored touch screen independent control, has the flow, the temperature and the breakdown demonstration.
9. Has 50 groups of molds to remember.
10. The entire machinery uses several controls.
11. Complete machine power: 30KW (unilateral)

发布时间：2008-9-1 15:30:33

已阅： 15次

这些产品信息可能对你有用： IMd/IML shaper pressure High

在Google查找更多“ IMd/IML shaper pressure High”